IDOit +
IDOit + is a complete salt electrolysis treatment system with salt level measurement, pH regulation and redox regulation.
Guarantee3 Years
IDOit , salt electrolyser complete top of the range system
With salt electrolysis you opt for a high-performance treatment and simplify the maintenance of your pool.
No need to buy, store or handle aggressive products.
From a very small quantity of salt in the pool water, 4 to 5 grams of salt per litre, the electrolysis cell produces the chlorine needed to treat the water and eliminate bacteria, algae and chloramines...
Chlorine is recombined back into salt due to the action of UV from the sun thus completing a cycle with little to no environmental impact.
No skin irritation or red eyes caused by chlorine, the water is healthy and limpid. Swimming becomes a pleasure again.
Simplicity
IDOit + technology maintains the same chlorine production capacity despite variations in temperature, salt levels and cell condition.
Serenity
Don't worry anymore about pH, IDOit + automatically regulates pH to maintain the ideal level.
Equipped with a TDS sensor, IDOit + measures and displays the quantity of salt to be added. This technology allows to expand cell life.
In the absence of UV, when a pool is covered by any type of cover (liner, cover, tarpaulin, etc.) or in the case of an indoor pool, IDOit + will stop its chlorine production when the redox set point is reached in order to limit over-chlorination and protect the equipment (liner, cover, etc.). Similarly, it will resume production below the set value to avoid under-chlorination and the risk of green water if the pool remains closed by a cover for a long period, for example.
To ensure an optimal treatment, IDOit + has many functions : auto cleaning cell using polarity inversion, system remembers the polarity setting to preserve the life of the cell, 24 to 72 hour boost function, intuitive and comprehensive display (temperature display, quantity of salt to be added, pH...), automatic overwintering mode...
...Free yourself from the constraints of water treatment.
Reliability
All our devices are tested and validated at each step of the manufacturing process. Each device has a unique serial number to assure traceability. REGUL’Électronique guarantees its devices and pledges the best after sales service.
Technical data sheet
Volumes of treatment :
up to 50 m3 with CR10 cell, up to 70 m3 with CR16 cell and up to 100 m3 with CR20 cell (allow a margin of 20% depending on pool use and the climatic region of the pool).
- Capacity of treatment0 to 100 m3
- Power consumption50 W to 100 W depending on model
- Power supply240 V~
- Dimensions (LxHxD)197 x 265 100 mm
- Length of the cell280-330 mm
- Transparent cellYes
- CaseIP65
- Lifespan of cellMinimum 5000 hours
- Maximum flow30 m3/h
- Circulation detectionYes
- PH functionYes
- Redox functionYes
- Roller shutter functionYes
- Temperature measurementYes
- Salt measurementYes
- Fuse protectionYes
- Production adjustment0 to 100 % - in steps of 1 %
- Salt concentrationIdeal : 4 g/l